USED HEM 20" X 38" MITERING BASE DUAL POST BANDSAW DC-2038RBI DUAL MITERING

Description

Specifications
Max. cutting cap. 90 deg, round: 20”
Max. cutting cap. 45 deg, round: 20”
Max. cutting cap. 30 deg, round: 20”
Max. cutting cap. 90 deg, rectangular: 20” H x 38” W
Max. cutting cap. 45 deg, rectangular: 20” H x 24” W both directions
Max. cutting cap. 30 deg, rectangular: 20” H x 16” W one direction
Max degree of miter: 30 degrees
Blade dimensions: 2” x .062 x 24’6”
Blade guides: Carbide
Guide Arm (Manual / powered): Powered
Blade speeds: 65 - 350 FPM
Number of speeds: Infinite
Blade motor: 15 H.P.
Blade drive type: Motor to gearbox
Blade tension type: Hydraulic
Blade wheel size: 28”
Head Lift Type: Hydraulic
Hydraulic motor: 5 H.P.
Coolant type: Flood
Number of Vises: 4
Vise Type (Manual / Hydraulic / Air): Hydraulic
Controls: Free standing console
Voltage: 220 / 440 volt 3 phase
Currently Wired: 440 volt 3 phase
EQUIPPED WITH:
2 degree canted head
Split front vise
Hydraulic blade tension
Powered miter from control with LED readout
Cut watcher system
Full capacity top clamps (both in/out feed sides of blade)
Input and Output 48” roller tables that telescope out of the way when saw base rotates
Powered chip conveyor
Powered blade chip brush
Push button blade speed control with LED readout
Laser light
NOTICE! IF BUYING THROUGH EBAY THERE IS A 10% ADDITIONAL CHARGE TO COVER EBAY FEES. IF PAYING THROUGH EBAY OR PAYPAL THERE WILL BE AN ADDITIONAL 3% FEE FOR THAT SERVICE!
Westbrook Engineering is one of the country’s largest stocking dealers of used metal fabricating machinery specializing in bandsaws. We have over 40,000 square feet of warehouse space to repair and refurbish machinery back to factory specs prior to shipping to the customer.
We are not just another machinery broker.
We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know.
Be sure to add us to your favorite sellers list for daily additions!!!
Loaded on truck – No charge
Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges.
6% Michigan sales tax where applicable.
Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra.
If you have any questions or if you would like to schedule an inspection please contact us.
Provisions:
It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or set up, and to safeguard adequately the machine or machines to conform to all Federal, State and Local Government Safety Standards, and all Industry Safety Standards.
MDNA return privilege applies to all machines (unless sold as-is). We will accept (within 30 days of shipment) any machines and equipment, freight prepaid, for refund of the purchase price if proven mechanically unsatisfactory; or repair at dealer’s option.
Machines are shipped F.O.B. our plant. If damages are to occur during shipment it becomes the freight company’s responsibility.
It is important that you contact us with in 24 hours.  You need to inform me of how and when you will pay for your item and how you plan on shipping it. If you do not contact me within 10 days it will be treated as a non paying bidder and the appropriate action will be taken
.